Home > Lie-Nielsen Toolworks > Hand Planes > Bench Planes > Standard Bench Planes >

Lie-Nielsen No.1 Bench Plane - Bronze
Lie-Nielsen No.1 Bench Plane - Bronze


 
Our Price: $225.00

Quantity in Stock:3

Availability:: Usually Ships in 24 Hours
Product Code: A100
Qty:

Description Tool Care
 

No. 1 Bench Plane

Based on the famous Stanley No. 1, this miniature Bench Plane handles like a block plane and is wonderfully suitable for fine detail work and final touches.

  • 5-1/2" (14cm) long
  • 1-3/16" (3cm) x .110" (2.79mm) thick blade
  • Bronze body
  • .4 lbs.
Use
  • Geometry:

    All Bench Plane blades are bedded at 45° with the bevel down.

    Blade Sharpening:

    Your Lie-Nielsen Bench Plane is ready to cut wood out of the box. The blade is ground sharp at a 25° bevel. A secondary bevel of up to 5 ° helps achieve a razor edge quickly. This also improves edge life in hardwoods.

    Mouth Adjustment:

    To adjust the mouth opening, loosen the two locking screws at the back of the frog; then turn the middle adjuster screw. Observe the opening in front of the blade. When it is correct, set the locking screws again.

    Chipbreaker:

    Our Chipbreaker is 1/8" thick. The raised lip under the bevel of the chip-breaker is back beveled 1° to ensure that the leading edge contacts the blade firmly. You should never need to dress this surface, but if you do, use a very fine stone and be sure to maintain the angle. The 25° bevel may be honed occasionally. For general work, set the end of the chipbreaker about 1/16" from the cutting edge of the blade; for the finest smoothing work, set it closer to the edge.

    Blade Adjustment:

    To advance the blade, turn the adjuster nut clockwise. It is always a good idea to finish adjusting the blade by a forward adjustment to take up backlash and to prevent the blade from moving. In order to be able to adjust the blade easily, do not overtighten the lever cap screw.


Accessories
Lie-Nielsen Small Plane Sock Lie-Nielsen Tool Care Kit Camellia Oil 8 oz Lie-Nielsen No.1 Bench Plane Replacement Blade
Our Price: $8.00
Our Price: $39.00
Our Price: $22.99
Our Price: $35.00
Lie-Nielsen Honing Guide
Our Price: $125.00
LIe-Nielsen Honing Guide

Share your knowledge of this product. Be the first to write a review »