Home > Lie-Nielsen Toolworks > Hand Planes > Bench Planes > Low Angle Bench Planes >

Lie-Nielsen No. 102 Low Angle Block Plane - with holster
Lie-Nielsen Small Block Plane


 
Our Price: $144.95

Quantity in Stock:(Out of Stock)

Availability:: Usually Ships in 4 to 6 Weeks
Product Code: A220S
Qty:

Description Tool Care
 

Small Block Planes

Based on the Stanely No. 102 and 103 these small planes fit perfectly in the hand, slip easily into the pocket, and are destined to become the most useful tools in your workshop.


The 1-1/4" wide x 1/8" thick blade is 1/8" thick for chatter-free cuts. Unobtrusive Stainless Steel adjuster offers blade control of micrometer ease and precision with minimum backlash. 5-1/4" long.


Leather Holster is only available for No. 102.


Blade in the low angle plane (No. 102) is bedded at 12 degree for fine cuts and end grain. Bronze body, 15.2 oz.


Blade in the standard angle plane (No. 103) is bedded at 20 degree for heavier cuts with the grain. Bronze body, 1.0 lbs.

Use
  • Adjustable Mouth Block Planes:

    The Adjustable Mouth Block Plane is a general purpose tool, useful for fine trimming and finishing work, as well as rapid stock removal. The body has an adjustable shoe to allow quick and easy control of the mouth opening. The best finishes will be obtained with the blade set to take a very small cut, and with the mouth opening no larger than necessary to pass the chip. When you want to cut more aggressively, open the mouth more and advance the blade for deeper cut. For best results on end grain, set the blade and mouth fine.

    Geometry:

    In the Low Angle Plane, the blade is bedded at 12°, making the included cutting angle 37°. In the Standard Angle, it is bedded at 20°, for a 45° cutting angle. Both blades come with a 25° flat ground bevel.

    Blade Sharpening:

    The blade comes ready to use. Slight additional honing will increase performance. A secondary bevel of up to 5 degrees helps achieve a razor edge quickly. This also improves edge life in hardwoods. For more information on advanced sharpening we suggest David Charlesworth’s DVD Hand Tool Techniques Part 1: Plane Sharpening.

    Mouth Adjustment:

    Hold the sole in the palm of your hand and loosen the brass locking screw. Adjust with the brass lever. Tighten the screw firmly, but do not overtighten.

    Blade Adjustment:

    Hold the tool in one hand with your fingers supporting the sole and your thumb on the cap iron just in front of the screw. Loosen the spinwheel and, with your thumb still holding the blade and cap, adjust the blade. Tighten the spinwheel. Do not overtighten. You should be able to adjust the blade after loosening the spinwheel about ¼ turn. Make sure the mouth is adequately open before advancing the blade to avoid damaging the edge.


Accessories
Lie-Nielsen No.102 - 103 Small Block Plane Toothed Blade Lie-Nielsen Honing Guide Lie-Nielsen Tool Care Kit Camellia Oil 8 oz
Our Price: $55.00
Our Price: $125.00
Our Price: $39.00
Our Price: $22.99
LIe-Nielsen Honing Guide

Share your knowledge of this product. Be the first to write a review »