High angle frogs (HAF) have a 50 degree bedding angle which can improve results in highly figured woods. On the other hand, the higher angle does not improve performance on soft straight grained lumber and may require more effort to push the plane.
We recommend the 45 degree frog which is standard on Lie-Nielsen bench planes for most work.
Tip: For a quick check of shipping cost - put the item in the shopping cart. - The only information we ask is your zip code. |
|
|
Publisher's or Manufacturer's Information and Features
|
| Lie-Nielsen No.6 Bench Plane - Iron |
Availability: Normally ships in 0-24 Hours Additional Views - Options:click images below (if any).
Bench Planes with Kingshott, LN 50 Degree Frog (HAF)
|
|
The Lie-Nielsen No.6 Bench Plane is the Fore or Try Plane size - midway between a Jack and a Jointer. It is 18 in. long with a 2 3/8 in. blade. Weight 7 1/2 lbs. - Body material: Ductile Iron
- Length overall: 18 in.
- Blade width: 2-3/8 in. with improved chipbreaker
- Blade material: .140 in. thick A-2 tool steel hardened to Rockwell 60-62
- Handle and knob: Cherry wood is standard - Cocobolo upgrade is available below
- Illustrated instructions included with each plane
- Guarantee: Materials and workmanship are guaranteed for the life of your tool
- Additional Info (PDF Format): Use and Care Instructions
|
| |
|
|
Copyright© 1999 Craftsman Studio
|
|
)
)
