Lie-Nielsen No.112 Large Scraping Plane is based on the Stanley 112. Sharp and set properly with a slight forward tilt to the blade - a very light depth of cut - and smooth light strokes - this tool will produces a final finished surface on the most difficult hardwoods. Its size makes it ideal for finishing large flat surfaces such as tables. Weighs just over 4 pounds.
Blade hardened to Rockwell 55 which is soft enough to burnish well but hard enough to hold an edge well
Body material: Ductile Iron
Length overall: 9-1/2 in.
Blade width: 2-7/8 in.
Blade material: 1/8 in. thick A-2 tool steel hardened to Rockwell 55
Handle and knob: Cherry wood is standard - Cocobolo is available when offered below
Illustrated instructions included with each plane
Guarantee: Materials and workmanship are guaranteed for the life of your tool
)
)
