Lie-Nielsen Large Router Plane - $140.00
A router plane is a great tool for working shallow mortises - hinge gains, inlay, door locks, trimming tenons and the like. The Lie-Nielsen version is loosely based on an early Stanley model, but with an improved depth stop and adjuster. Also, the blade is held solidly in the body in a square broached hole (blades will not fit original Stanley's)
Included fence (pictured at left of tool) can be installed on either side. One side of the fence is designed for following a straight edge and the other is for contours.
- Patent pending
- Weight: 1.65 lbs
- Body material: Ductile Iron
- Blade: 3/8 in. square of O-1 Tool Steel
- Size: 8-1/4 in. long x 3-1/2 in. wide x 3-3/4 in. tall
- Handle and knob: Cherry wood is standard - Cocobolo is available when offered below
- Illustrated instructions included with each Large Router Plane
- Guarantee: Materials and workmanship are guaranteed for the life of your tool
The "Lie-Nielsen Router Plane Blade Adapter" permits the blades made for the "Small Router Plane" to be used in Large Router Plane.
#71 Router Plane Setup and Use
The #71 is a tool we get a lot of questions about. Deneb Puchalski shows us the setup and just a few of the uses of this wonderful tool.
|
Special Free bar of Craftsman Studio Plane Sole Wax with purchase of any Lie-Nielsen Plane.
If you want additional bars, you can add them to your cart below at the regular price of $3.95. |
| |
|
|
Copyright© 1999 Craftsman Studio
|
|
)
)
)
