Starrett Fractional Reading Dial Calipers - 6 in
With the ability to provide quick, accurate measurement of O.D., I.D. and depth, the dial caliper is one of the most versatile measuring tools available.
For many applications, the dimension being checked is specified as a fraction. Since dial calipers display measurements as decimals, the person doing the measurement must convert the decimal readout from the dial into a fraction – inconvenient at best, and sometimes leading to errors. The Starrett 1202F solves this problem.
The 1202F shows measurements as fractions on the yellow outer scale with 1/64th inch graduations, and decimal measurements on the white inner scale with 1/100th inch graduations.
- 0-6" range with 1" per revolution
- Sharp, clear dial graduations of 1/64in. on the yellow outer scale, and .01in. on the white inner scale
- Sharp, black graduations on the satin finished bar, every .1in.
- Knife-edge contacts for both inside and outside measurements
- One hand use with the thumb-operated, fine adjustment roll
- Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod
- Positive, spring-loaded double pinion anti-backlash control
|
)
