Publisher's or Manufacturer's Information and Features
Czeck Edge Marking Knives and Awls
Czeck Edge Marking Knives and Awls
You're in for a treat if you haven't tried the layout tools produced by Czeck Edge Hand Tool of Marietta Georgia. The owner, Bob Zajicek, personally designs each tool with great attention to ergonomics ensuring they function as well as they look. He's a stickler for detail and goes the extra mile for quality using costly enclosed bronze ferrules and precision ground/hardened steel blades.
Take a moment to peruse the selection of exotic hardwoods and additional photos from the links below.
Kerf Kadet Marking Knife (Fourth from left in photo above)
Smallest knife designed to get into tighter spaces. Preferred by those doing very detailed work or having smaller hands.
Size: 7-1/4 in long - 1/2 in. diameter
Blade: 1-7/16 in long x about .027 in. thick of O-1 tool steel hardened to Rc 59-61
Ferrule: Enclosed bronze with 3 grip assist rings
Wood: Standard in Cocobolo and Bloodwood - available at extra cost in Olivewood, and Kingwood
Pattern Pilot Marking Knife (Second from left in photo above)
Medium size is most popular model. Best choice for a general purpose layout knife.
Size: 7-1/2 in long - 9/16 in. diameter
Blade: 1-3/4 in long x about .059 in. thick of O-1 tool steel hardened to Rc 59-61
Ferrule: Enclosed bronze with 3 grip assist rings
Wood: Standard in Cocobolo and Bloodwood - available at extra cost in Olivewood, and Kingwood
Line Driver Marking Knife (Third from left in photo above)
Largest knife designed to for heavy duty marking for large work such as making work benches or table base mortises. Preferred by those having larger hands.
Size: 7-1/2 in long - 5/8 in. diameter
Blade: 1-7/8 in long x about .123 in. thick of O-1 tool steel hardened to Rc 59-61
Ferrule: Enclosed bronze with 3 grip assist rings
Wood: Standard in Cocobolo and Bloodwood - available at extra cost in Olivewood, and Kingwood
Needle Point Scratch Awl (Left in photo above)
A refined example of this popular tool perfect for starting small screws in soft woods and aligning screw holes
Size: 7-3/4 in long with 1-3/8 in. diameter x 3-1/4 in long handle
Blade: 4-1/2 in long x 5/32 in. diameter blade of O-1 tool steel
Ferrule: Enclosed bronze with 3 grip assist rings
Wood: Standard in Cocobolo and Bloodwood - available at extra cost in Olivewood, and Kingwood
Bird Cage Awl (Right in photo above)
Difficult to find, this is the very best example we've seen of this useful tool. It will drill tapered holes in hard and softwoods suitable foe starting small screws in locations where drilling would be cumbersome or impractical. The edges of the blade are crisp and sharp resulting in great cutting performance
Size: 6-3/4 in long with 1-1/2 in. diameter x 3-1/4 in long handle
Blade: 3-1/2 in long x 3/16 in square blade of O-1 tool steel
Ferrule: Enclosed bronze with 3 grip assist rings
Wood: Standard in Cocobolo and Bloodwood - available at extra cost in Olivewood, and Kingwood
Scraper Burnisher
Attractive and comfortable burnisher will turn a burr on the hardest of your scrapers
Size: 8-3/4 in long with 1-1/4 in. diameter x 5 in long handle
Rod: 11/32 in diameter x 3-3/4 in. long M2 High Speed Steel hardened to Rc 62-64 and polished to a 4 micron finish
Ferrule: Enclosed bronze with 3 grip assist rings
Wood: Standard in Cocobolo - available at extra cost in Olivewood, and Kingwood
)
)
)
)
)
