Shaped Felt Wheel for Carving Tools
A constant problem for carvers is honing the inside of gouges and parting tools. This felt wheel not only has the right shape for such work, but because it is extra hard, it will hold that shape. It is particularly handy with tools too small for easy honing with a slip stone.
The side of the wheel can be used for out-cannel honing or for flat blades of all types. The center hollow is ideal for high-sweep gouges.
150mm (5-7/8") in diameter, 22mm ( 7/8") thick, 5/8" hole with 1/2" bushing. Maximum 3600 rpm. |
