Veritas Carver's Vise
A good carver's vise should be adjustable in all three axes. This one has full rotation in two axes and 3" of height adjustment in the third axis. But more important, it has controlled release; when you relieve the clamping pressure, a combination of internal springs and O-rings provides residual resistance so that your work does not suddenly fall or rotate. You can reposition the work and adjust it exactly to your liking without needing three hands. This feature virtually eliminates accidental damage.
The vise can be bolted directly to a bench or clamped in any standard vise; the base has two flats on it. Alternatively, the vise can be side or top mounted through any standard 3/4" dia. dog hole using the auxiliary rod/sleeve/wing-nut assembly, usable on benches from 5/8 in. to 4 in. thick.
Finally, the body is arched to let work overhang the edge of a bench when top mounted, giving maximum flexibility of use. The body is made from ZA-12 with a solid brass hub and a repositionable gyratory locking lever. It has three screw slots with bottom counter-bevels for standard wood screws.
Included is a 3-1/2 in. dia. by 1/2 in. thick mounting plate with a steel rod. For quick interchange of workpieces, spare 3-1/2 in. dia. mounting plates are available. For mounting smaller pieces, such as duck heads or bird carvings, a 2 in. dia. mounting plate with rod is available as an accessory. Patented. Made in Canada.
Additional Carver's Vice info: (PDF Format): Veritas Carvers Vice
Carver's Vice Screw: Carvers tapered screw for fastening work with a hole drilled in the bottom.
Carver's Vice Screw
 |
|
)
