Home > Lie-Nielsen Toolworks > Hand Planes > High Angle Frogs >

High Angle 55 degree Frog
High Angle 55 degree Frog

Alternative Views:

Our Price: $85.00

Quantity in Stock:1
Availability:: Usually Ships in 24 Hours
Product Code: A492

Hand Tool*:


High Angle Frogs

These unique High Angle Frogs quickly convert our bench planes (No.3 - No.7) to Middle Pitch (55 Degrees). Will not fit other makes of planes. May be ordered extra or installed in the tool.


Notes on Using the High Angle Frog with a Conventional Chipbreaker

Conventional bench planes have the blade set in the tool, or pitched, at an angle of 45°. Our unique High Angle Frogs pitch the blade 5° to 10° higher.

If you have our old style Chipbreaker with a very fine mouth setting, shavings may clog the throat. This is especially true if you prefer to set your chip breaker (back iron) very close to the cutting edge. Because our blades are so thick, you will probably find that you can move the chip breaker back, creating more clearance.

If you still get clogging, then file the leading edge of the mouth at a slight angle to allow chip clearance. It is best if you do not file all the way to the sole, but leave a small flat. To make it easier to see what you are filing, blacken the area with a magic marker.

Share your knowledge of this product. Be the first to write a review »