Home > Lie-Nielsen Toolworks > Honing Guide >

Lie-Nielsen Honing Guide
LIe-Nielsen Honing Guide


 
Our Price: $125.00

Quantity in Stock:17
Availability:: Usually Ships in 24 Hours
Product Code: A-HG
Qty:

Description
 

Lie-Nielsen Honing Guide

This version of the side clamping style of honing guide is solidly machined from Stainless Steel, with a Bronze bearing.

It features removable jaws: replacement jaws are available for Chisels 3/16" and under, tall jaws for Mortise Chisels, long jaws for very short blades and angled jaws for Skew Blades. Lie-Nielsen has designed these jaws for our blades and chisels, not other makers'.

The Honing Guide comes with the standard pair of jaws that fit most of Lie-Nielsen blades.

Lie-Nielsen Honing Guide Jaws

  • The Standard Jaws (included with the Honing Guide) fit most of our plane blades, as well as our 1/4" to 3/4" Bevel Edge Chisels.
  • The Chisel Jaws fit our 1/8" and 3/16" Bevel Edge Chisels (as well as our 1/4" to 3/4" Bevel Edge Chisels).
  • The Mortise Chisel Jaws fit all of our Mortise Chisels, as well as our 1" Bevel Edge Chisel.
  • The Long Jaws fit blades for the following Lie-Nielsen planes: No. 610, 10-1/4, 041, 042, 073, 1/2, and 85. These jaws are reversible. The short end hones a bevel up to 40° and the long end hones a bevel up to 30°.
  • The 18° Skewed Jaws fit our No. 140 Skew Block Plane (left or right hand). The blade for the left hand No. 140 fits with the left skewed jaws, and the blade for the right hand No. 140 fits with the right skewed jaws.
  • The 30° Skewed Jaws fit our No. 98/99 Side Rabbet Planes (left or right hand). The blade for the No. 98 fits with the right skewed jaws, and the blade for the No. 99 fits with the left skewed jaws.
  • Lie-Nielsen Honing Guide

    Accessories
    Lie-Nielsen Chisel Jaw Pair
    Our Price: $25.00
    Lie-Nielsen Chisel Jaw Pair

    Average Rating: 5 of 5 Total Reviews: 1 Write a review »

      1 of 1 people found the following review helpful:
     
    Best Honing Guide Ever February 1, 2019
    Reviewer: David R from Katy, TX United States  
    I have been frustrated for years with trying to get a good edge on my plane irons. When I first started out I purchased one of those cheap reproductions of the Eclipse honing guide only to be frustrated with the results I got due to the poor machining. I tried freehanding only to end up with worse results than with the cheap guide. After much research I happened upon this guide, which promised to provide better results because of its superior machining and materials. I almost didn’t get it because of the price, but couldn’t find any other affordable alternative. So I sucked it up and ordered one, which came in today. I immediately set about sharpening all my chisels. These aren’t Lie-Nielsen chisels, but a variety of lesser expensive ones. All I can say is wow! I didn’t realize how badly I had messed up my chisels. It took a lot of work to get them squared up and sharp but the Lie_Neilsen honing guide delivered great results. I can’t wait to work on my plane irons.

    Was this review helpful to you?