Veritas Mark II Deluxe Honing Guide Set
The most versatile set, the deluxe honing guide set includes both
the standard and narrow-blade clamping heads as well as the
angle registration jig, a straight roller base and a camber roller
base. Combined, the two clamping heads accept blades ranging
from 1/8" to 2-7/8" wide. The completely predictable results this
set offers for a wide variety of blades makes it useful in the shop
of any woodworker who works with hand tools.
Veritas Mk.II Standard Honing Guide
Veritas Mark II Honing Guide - The key to consistent and fast honing is
repeat-ability and this guide delivers it in spades. The main
difference in our Mk.II version is its integral blade registration
system that squares the blade and sets the bevel angle in one easy step.
The Mk.II Honing Guide has three gross bevel-angle range
configurations: a high-angle range (25 Degrees to 54 Degrees in seven
increments), a standard-angle range (15 Degrees to 40 Degrees in six
increments), and a third range for back bevels. The guide body has two
mating components that lock together precisely, secured by a single
thumbscrew. The registration jig slides onto the guide body, centering
and squaring the blade using an integral fence. The blade stop has
discrete positions for preset angles.
The Veritas MKII retains the three-position eccentric roller of our
original model, a feature that is universally liked as it allows a
micro-bevel to be honed quickly and accurately after only a simple turn
of a knob. No other action is needed and results are completely
predictable. The 2 in wide roller is stable for even the narrowest of
blades.
The honing guide can easily accommodate chisels as narrow as 1/4 in,
and blades as wide as 2-7/8 in and up to 1/2 in thick. Also works with
short blades such as spokeshave blades. Manufactured from die-cast zinc
alloy, with precision-machined brass and steel parts.
Veritas Mk.II Narrow-Blade Honing Guide
For those who predominantly sharpen narrow blades, we offer a narrow-blade honing guide consisting of the narrow-blade clamping head, the standard roller base and the angle registration jig. It clamps blades from 1/8" to 1-1/2" wide using parallel jaws to ensure blades stay square to the jig. Whether they have bevelled or square edges, blades are kept centered and tight to the reference face of the jig by the canted jaws. It accepts beveledged chisels up to 15/32" thick and square-edged chisels up to 11/32" thick, and hones bevel angles from 15 to 40 degrees and back bevels from 10 to 20 degrees.
Detailed instructions included
Made in Canada
