Home > Veritas Tools >

Veritas Wonder Pup - Package of One
Veritas Wonder Pup - Package of One

Our Price: $29.99

Quantity in Stock:4
Availability:: Usually Ships in 24 Hours
Product Code: V05G1002


Veritas Wonder Pup

Veritas Wonder Pup clamps? - Well, you have to wonder why nobody thought of them before and then wonder if you can get along without them.

At the lowest projection, only 5/8 in. of the dog head is above the bench. The swivel handle lets you apply ample clamping pressure in any position. The dog is drilled and tapped at a 3 Degrees angle to ensure that work is held tight to the bench.

  • Clamping Face: 2 x 1/2 in.
  • Overall Length: About 8-1/2 in.
  • Shank Length: 2-3/4"
  • Shank Diameter: .740 in.
  • Hole Diameter Needed: 3/4 in.
Made in Canada

You May also want to consider:

Veritas Bench Pups - (Image above left)

Set of 2 - Cutting square bench dog mortises is hard enough when you are building a bench; it is particularly difficult in a finished bench. Yet good dogs make a bench far more functional.

Made from solid brass rod, they can be installed in any bench by drilling a 3/4 in. hole.

Brass dogs are not only non-corroding, but are kinder to your tools if you happen to slip and strike one with a sharp edge. The combined crosshatching and 2 Degrees inward slope of the dog face hold wood very securely. The side spring lets the dog slide smoothly, but holds it well at any desired projection.

They are fine for benches with tops up to 2 in. thick and are ideal for use in bench sides; just drill holes in the skirt or the edge of the top.

Share your knowledge of this product. Be the first to write a review »