Home > Lie-Nielsen Toolworks > Hand Planes > Special Purpose tools >

Lie-Nielsen No.66 Bronze Beading Tool and Blade Set



 
Our Price: $175.00

Quantity in Stock:4

Availability:: Usually Ships in 24 Hours
Product Code: A370
Qty:

Description Tool Care
 

Bronze Beading Tool and Blade Set

This Bronze Beading Tool can quickly produce a wide range of decorative profiles without the fuss and fiddle of setting up an electric router.

Derived from an early, generously proportioned Stanley No. 66, it has a polished cast Bronze body and Brass blade clamp. Two fences are included, one for curved work and one for straight work, and can be adjusted along the slot across the bottom of the tool.

The Beading Tool comes with a double-ended 1/8" and 1/4" router blade and seven double-ended blades with 14 different profiles for beading, reeding, and fluting. Also included are two blank blades that can be worked with files to make your own shapes, which makes quick work of reproducing small pieces of molding for repair or restoration.

Blades are 5/8" wide x .060" thick and made from hardened, A2 Tool Steel. Will also fit the antique Stanley No. 66.

Beading Tool: Setup, Use and Sharpening
Use
  • Bronze Beading Tool

    Although the modern electric router is a universal and useful tool, many woodworkers will find the Beading Tool handy and fun to use for making a wide variety of decorative moldings, beading, reeding, fluting and routing with a minimum of fuss.

    Blades:

    The set of blades consists of 7 blades with 14 shapes, plus a 1/4" and 1/8" router. The blades are made of A-2 tool steel hardened to Rockwell 60-62. Each blade is designed to work as a scraping blade — generally while pulling the tool, though at times pushing will seem most comfortable — to remove a small shaving per stroke. In some cases, the larger shapes will work best if you lower them in the clamp as the work progresses for maximum rigidity. The blades — except the routers — should be sharpened by stoning the flat. Only rarely will work need to be done on the shape itself, with slipstones. Seven hardened, double-ended A-2 Tool Steel blades 5/8" (1.58cm) wide will make 14 standard shapes. Also included are 1/8" (3.17mm) and 1/8" (6.35mm) routers, and two blanks that can be worked with files to make your own shapes. This makes quick work of reproducing small pieces of molding for repair or restoration. The blades will fit antique Stanleys as well, for those who have or acquire one without blades.

    The blanks are not hardened, and may be worked with files to produce various shapes. The blanks are hard enough to last a reasonable amount of time without heat treating. If you prefer, you can send your shaped blanks to us for hardening ($5).


Accessories
No.66 Beader Blank Blades (5) Lie-Nielsen Honing Guide Camellia Oil 8 oz Lie-Nielsen Tool Care Kit
Our Price: $8.00
Our Price: $125.00
Our Price: $22.99
Our Price: $39.00
LIe-Nielsen Honing Guide

Share your knowledge of this product. Be the first to write a review »